Computer-Aided Design/Computer-Aided Manufacturing of Customized Abutment for Rehabilitating a Malpositioned Implant Using Digital Flow: A Case Report.

This study presented a rehabilitation option for malpositioned implants; this involved obtaining their position and inclination through intraoral scanning, and producing a customized abutment with CAD/CAM technology. The patient in this case report presented a root fracture in tooth 21 and was subjected to extraction, implant installation, and immediate provisional prosthesis. The implant was installed with a distal inclination due to anatomical limitations. After osseointegration, an intraoral scanning transfer provided a digital model (file extension .stl), which reproduced the implant's position and inclination. Then, the file was sent so that a customized abutment (CAD/CAM) could be manufactured, promoting the final rehabilitation of the case; this allowed for good hygiene, load distribution in the dynamic interocclusal relationship, and favorable esthetics, whereas many would otherwise recommend implant removal. The result presented lower costs, a shorter time frame, and a lower morbidity for the patient.

Influence of Tip Diameter and Light Spectrum of Curing Units on the Properties of Bulk-Fill Resin Composites.

OBJECTIVE: The aim of this study was to evaluate the influence of different light-curing units (LCUs) with distinct tip diameters and light spectra for activating bulk-fill resins. MATERIALS AND METHODS: The specimens (n = 10) were made from a conventional composite (Amaris, VOCO) and bulk-fill resins (Aura Bulk Fill, SDI; Filtek One, 3M ESPE; Tetric Bulk Fill, Ivoclar Vivadent) with two diameters, 7 or 10 mm, × 2 mm thickness. Following 24 hours of specimen preparation, the degree of conversion (DC) was evaluated using the Fourier-transform infrared unit. Knoop hardness (KHN) readings were performed on the center and periphery of the specimens. Data were assessed for homoscedasticity and submitted to one-way and three-way analysis of variance followed by the Tukey's and Dunnett's tests, depending on the analysis performed (α = 0.05). RESULTS: LCUs and specimen diameter significantly affected the DC. The Tetric Bulk Fill provided increased DC results when light-cured with Valo (54.8 and 53.5%, for 7 and 10 mm, respectively) compared with Radii Xpert (52.1 and 52.9%, for 7 and 10 mm, respectively). No significant differences in KHN results were noted for the conventional resin composite (Amaris) compared with LCUs (p = 0.213) or disc diameters (p = 0.587), but the center of the specimen exhibited superior KHN (p ≤ 0.001) than the periphery. CONCLUSION: The light spectrum of the multipeak LCU (Valo) significantly increased the DC and KHN of the bulk-fill resin composite with additional initiator to camphorquinone (Tetric Bulk Fill) compared with the monowave LCU (Radii Xpert). The tip size of the LCUs influenced the performance of some of the resin composites tested.

Influence of anterior load and restorative procedure on maxillary incisors with different cervical wear morphologies / Influência do procedimento restaurador e de contato anterior em incisivos superiores com diferentes morfologias de desgaste cervical

The aim of this study was to evaluate the influence of different anterior load type and restorative procedure on stress distribution of maxillary incisors with different noncarious cervical lesions (NCCLs) morphologies. Three-dimensional models of a maxillary incisor were generated. Beyond the sound model (SO), five NCCLs morphologies were simulated: shallow (SH), notched (NO), concave (CO), wedge-haped (WS) and irregular with dual center (IR' and IR"). Composite resin restoration of all the models was simulated (R). Two different anterior loads were applied: 100N on palatine middle third (ML) and 500 N on palatine incisal third (IL). The data were obtained in MPa using the Maximum Principal Stress and Von Mises criteria and the statistical analysis was performed (paired t-test with 95% confidence level). The IL provided higher compressive stress than ML, mainly on WS (-136.3MPa), IR" (-117.5) and NO (-71.1 MPa). The highest tensile stress found within the restored models was on NOR with IL (19,1 MPa). The Von Mises results showed higher stress concentration on non-restored and IL models (p<0.001). The anterior load type and restorative status were determinant factors on stress distribution pattern changes, whereas NCCLs morphologies had little influence in maxillary incisors.

O objetivo deste estudo foi avaliar a influência de diferentes tipos de contatos anteriores e procedimentos restauradores na distribuição de tensões de incisivos superiores com diferentes morfologias de lesões cervicais não-cariosas (NCCLs). Modelos tridimensionais de um incisivo central superior foram gerados. Além do modelo hígido (SO), foram simuladas cinco morfologias de NCCLs: rasas (SH), entalhadas (NO), côncavas (CO), em forma de cunha (WS) e irregulares com centro duplo (IR' e IR''). Restauração com resina composta em todos os modelos foi simulada (R). Dois contatos anteriores diferentes foram aplicadas: 100N no terço médio palatino (ML) e 500N no terço incisal palatino (IL). Os dados foram obtidos em MPa utilizando os critérios de Tensão Máxima Principal e de Von Mises e a análise estatística foi realizada (teste t pareado com nível de significância de 95%). A IL proporcionou maior estresse compressivo que ML, principalmente em WS (-136,3MPa), IR "(-117,5) e NO (-71,1 MPa). A maior tensão de tração encontrada nos modelos restaurados foi na NOR com IL (19,1 MPa). Os resultados de Von Mises mostraram maior concentração de estresse nos modelos não restaurados e IL (p <0,001). O tipo de contato anterior e a presença de restauração foram fatores determinantes nas alterações do padrão de distribuição de estresse, enquanto as morfologias dos NCCLs tiveram pouca influência nos incisivos superiores.

Influência do desequilíbrio oclusal na origem de lesão cervical não cariosa e recessão gengival: análise por elementos finitos / Influence of occlusal instability on the origin of non-carious cervical lesion and gingival recession: finite element analysis

Objetivo: avaliar o comportamento biomecânico de pré- -molar superior com presença de Lesões Cervicais Não Cariosas (LCNC) e submetido a três carregamentos oclusais distintos pelo método de elementos finitos tridimensional (3D). Material e método: nove modelos tridimensionais elásticos foram gerados, com propriedades ortotrópicas e isotrópicas: Hígido (H); LCNC não restaurada (LCNC) e LCNC restaurada com resina composta (RC); sendo todos estes modelos submetidos a três carregamentos: Axial (A), Oblíquo vestibular (V) e Oblíquo palatino (P). Os carregamentos tiveram intensidade de 150 N e a restrição de deslocamento foi realizada na base e lateral dos ossos cortical e medular. Os resultados foram gerados em tensão máxima e mínima principal. Resultados: O carregamento axial apresentou padrões de tensão mais favoráveis, independente da característica da região cervical. O carregamento palatino mostrou maior acúmulo de tensão de tração na região cervical vestibular e o carregamento vestibular resultou em maior tensão de compressão na tábua óssea vestibular. A presença de LCNC foi fator intensificador para o aumento da concentração de tensão na região cervical. A simulação da restauração com resina composta promoveu um comportamento biomecânico simular ao do hígido. Conclusões: que o carregamento palatino pode estar mais associado com a presença de LCNCs e o vestibular com a presença de recessão gengival. O ajuste oclusal e a restauração da LCNC são indicados para tornar o padrão de tensão mais favorável para o remanescente dentário.

Objective: to evaluate the biomechanical behavior of maxillary premolar with the presence of NCCL and submitted to three distinct occlusal loads, using the three-dimensional (3D) finite element analysis. Methods: nine three-dimensional elastic models were generated, with orthotropic and isotropic properties: Sound (H); Unrestored NCCL (NCCL) and NCCL restored with composite resin (RC); All models were submitted to three loads: Axial (A), Buccal (V) and Palataline (P). The loads intensity was 150 N and the displacement restriction was performed at the base and lateral of the cortical and medullary bones. The results were generated at maximum and minimum principal stress. Results: the axial loading presented more favorable stress pattern, independent of the characteristic of the cervical region. The palataline loading showed a greater concentration of tensile stress in the buccal cervical region and the buccal loading resulted in a higher compression stress in the buccal bone. The presence of NCCL was a relevant factor for increase concentration of stress in the cervical region. The simulation of the restoration with composite resin promoted a biomechanical behavior similar to that of the sound tooth. Conclusion that the palataline loading may be more associated with the presence of NCCLs and the vestibular with the presence of gingival recession. The occlusal adjustment and the restoration of NCCLs are indicated to produce the stress pattern more favorable for the dental remaining.